Note: Decal can be applied to any smooth surface or glass. Make sure surface is clean & grease free before installation

**WRITTEN INSTRUCTIONS ARE BELOW VIDEO INSTRUCTIONS**

Step 1 – Clean the area thoroughly with rubbing alcohol or soap and water.

Step 2 – Prepare the sticker for application by firmly rubbing a squeegee or credit card across the clear transfer tape.

Step 3 – Carefully peel the white paper backing off the sticker.

Step 4 – Slowly lower the sticker onto the surface and rub it in place firmly with a squeegee or credit card.

Step 5 – Slowly peel the clear transfer tape off at an angle. Be careful not to pull the sticker off the surface. If sticker pulls away from the surface repeat Step 4.